WorldretailerseMall

 

SOLAR YOUR HOME AND BUSINESS   

Info@ige-enterprises.net 

1-(703) 730-7785

 

About Our Manufacturer DBK  is a designer, manufacturer and builder of alternative energy systems: solar panels, solar systems, fuel cells, solar based fuel cell generators and solar based fuel cell  power plants in California, America and throughout the World. We design, build, package and install module solar power plants, solar based fuel cell generators and solar systems for homes and the commercial sector. Our focus is on reducing the cost of using and producing electric energy to our clients. DBK is your one-stop provider for your clean fuel (solar) energy needs. The specification include the embedded or attached dc-dc inverter with is physically part of the panel. The in`ut into the dc-dc inverter is 950 Watts. Product Name and Description JIL-1500 JIL-3000 Rated Power (Watts) 1500 3000 Series Fusing (Amps) 8 15 Current at Max Power (Amps) 7 14 Voltage at Max. Power (DC Volts) 220 220 Short Circuit Current (Amps) 7.6 14.8 Length (Inches) 62.5 62.5 Width 32.5 32.5 Depth of Frame (inches) 3.5 3.5 Shipping Weight (lbs) 70 70 The Grid-Tie Photovoltaic (PV) Power System consists of photovoltaic modules, a direct current to alternating current (DC-to-AC) power conversion device, DC wiring, DC and AC overcurrent protection, lightning protection, component mounting and mechanical support. The System is designed for use on residential and small commercial buildings of typical construction. Photovoltaic mounting is rafter-secured for structural compliance with most local building codes. We comply with the 2002 National Electrical Code (NEC-2002), IEEE STD 929-2000-Institute of Electrical and Electronics Engineers Recommended Practices for Utility Interface of Photovoltaic (PV) Systems, UL 1741-Underwriters Laboratories Standard for Safety-Static Inverters and Charge Controllers for Use in Photovoltaic Power Systems and the ICBO 2000-International Building Code. (1) Standard Test Conditions (STC) of 1000 Watts per square meter irradiance, air mass of 1.5, 25oC cell temperature used in lab testing and rating of photovoltaic modules. These conditions are only experienced in a laboratory setting. (2) The actual energy output in kilowatt-hours your system will produce each month is a function of many site specific and instantaneous variables including the operating temperature of the PV modules, the amount of solar radiation reaching the modules, the roof angle, and the array orientation relative to the south (“azimuth”), shading effects, soiling and installation quality.   The biggest saving of all is to get a JIL-3000 watts solar electric system

Accepting Orders Order Here Today!

Tentative Delivery Schedule